Service Engine light
Thread Starter
Teching In
Joined: Sep 2005
Posts: 20
Likes: 0
From: Lexington, SC
Service Engine light Yeah i just recently put on cold air induction on my 2000 trans am along with a smooth bellows and maf sensor from slp and my engine light came on and it says the air coming into the intake is hotter than expected for the current engine operating temperature any ideas?
TECH Apprentice
Joined: Jan 2002
Posts: 364
Likes: 0
From: Princeton, IN
what is the dtc code? p0xxx something like that
that code your talking about does not ring a bell... are you talking about the IAT sensor? is everything plugged in?
is the maf sensor one of the 85mm? with the built in IAT?
that code your talking about does not ring a bell... are you talking about the IAT sensor? is everything plugged in?
is the maf sensor one of the 85mm? with the built in IAT?
TECH Apprentice
Joined: Jan 2002
Posts: 364
Likes: 0
From: Princeton, IN
Ok p0113 this for the iat "Intake Air Temperature Sensor" this code could only mean a few things... sensor is not plugged in or you have damaged the sensor some how it may have also failed but unlikely. The wire leading to it might be damaged. I think the computer pulls timing advanced from the car when this code is tripped this is for fail safe reasons “it retards the timing”
The stock location for the iat sensor is on the right back side of the intake lid "facing the car. It’s small and sticks out a little uses two wires. I can get pictures if you’re unable to find it
The 85mm maf has the iat build in and can be used on the f-body ls1... did you get a harness with this maf and did it have two connections on the harness.
The stock location for the iat sensor is on the right back side of the intake lid "facing the car. It’s small and sticks out a little uses two wires. I can get pictures if you’re unable to find it
The 85mm maf has the iat build in and can be used on the f-body ls1... did you get a harness with this maf and did it have two connections on the harness.
Thread Starter
Teching In
Joined: Sep 2005
Posts: 20
Likes: 0
From: Lexington, SC
I got the problem fixed i looked under the hood and noticed the temp sensor that is supposed to be in the airbox lid was not there and i put it in there yesterday and everything is a go and it did put a retard on my timing because its running a lot smoother and much quicker so. thanx for the help
