No Rev Limiter

Reply Subscribe

Thread Tools

Search this Thread

Oct 16, 2005 | 09:59 PM

Taphee6

Thread Starter

TECH Apprentice

iTrader: (2)

Joined: Apr 2004

Posts: 323

Likes: 0

From: Cary Il

No Rev Limiter

My Rev Limiter is set at 6800 and last night at the track I was hitting 7100 and did not bump the rev limiter. This was in 1,2,and 3rd gears. I had to back off the gas or blow the motor. How can this be???

Thanks in advance

Oct 16, 2005 | 10:04 PM

dcdime

On The Tree

Joined: Oct 2005

Posts: 132

Likes: 0

If you are using your stock tack, it could be off a few hundred RPMs

Oct 16, 2005 | 10:06 PM

soundengineer

8 Second Club

iTrader: (16)

Joined: Jul 2003

Posts: 4,651

Likes: 17

From: Chicago IL

what table are you looking at for the rev limiter
should be cutoff rpm vs gear...and your resume must be less than your cutoff

Oct 16, 2005 | 10:06 PM

Taphee6

Thread Starter

TECH Apprentice

iTrader: (2)

Joined: Apr 2004

Posts: 323

Likes: 0

From: Cary Il

Tack

I have a stock tack and an Autometer. Both are accurate when I checked the computer RPM with HP tuners.

Oct 16, 2005 | 10:08 PM

Taphee6

Thread Starter

TECH Apprentice

iTrader: (2)

Joined: Apr 2004

Posts: 323

Likes: 0

From: Cary Il

Cutoff

You got it. I just pulled up the file and last time it was tuned the shop changed the cutoff. It was set at 7000. I should have looked before shooting off at the keyboard.

Thanks Guys

Last edited by Taphee6; Oct 16, 2005 at 10:23 PM.