Need Help..
#1
Teching In
Thread Starter
Join Date: May 2004
Location: Houston,Tx
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My car is a 99z28 m6 and is throwing these two codes p0101 Mass air flow circuit signal low and p0108 map or baro press signal high. I replace the mass air meter and the small sensor behind the intake and it work fine for 2 days then the codes came back and my car is runnin real rich and won't idle. I don't know what else to do any advice.
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
#3
Teching In
Thread Starter
Join Date: May 2004
Location: Houston,Tx
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
LME 347 forged bottom end,LME stage 2 heads,cam is 232/236 .575/.578@112,lt headers,offroad y-pipe,ls6 intake,ported throttlebody,Mti tuned,3:42 gears,slp loudmouth,stock mass air,