bowtietilldeath

So I bent a pushrod, and swapped new ones in. Then when I fired it up, it was backfiring before it started, and a few times after it was running. It smelt super rich, and would barely run. Now it won't even start at all. It wasn't flashing the ces light either. The only thing I can think of is maybe the fact that my dumb-*** didn't disconnect the battery before unplugging the coil packs. I live in Wa. State, does anyone know if a regular repair shop could deal with this, there really aren't any good performance shops here. Any help would be greatly appreciated. Thankyou

ninobrn99

iTrader: (8)

it could be a bent valve also. make sure all the connectors are connected.