Hypertech Question
Thread Starter
On The Tree
Joined: Feb 2002
Posts: 175
Likes: 0
From: Lincoln, NE
Hypertech Question If you go to add something on to your hypertech programming, like change fan turn on temp. Do you have to input all the other stuff you had in there before again?
Re: Hypertech Question No, I will remember your previous setting. If I remember correctly, it will ask you if you wish to keep that setting or change it. Example: you changed 1-2 shift to be +2 (A4), when this part of the programming comes up, the current setting show +2, and if you don't want to change it reply "N" to keep it set at +2.
Hope this answers your quetion.
- Tom
<img src="graemlins/camaro.gif" border="0" alt="[Chevrolet]" />
[ February 22, 2002: Message edited by: Tom99SS ]</p>
Hope this answers your quetion.
- Tom
<img src="graemlins/camaro.gif" border="0" alt="[Chevrolet]" />
[ February 22, 2002: Message edited by: Tom99SS ]</p>
Thread Starter
On The Tree
Joined: Feb 2002
Posts: 175
Likes: 0
From: Lincoln, NE
Re: Hypertech Question Hmm...It didn't say that for me. It asks if I want to keep it stock. When I first started it up it said, Hypertech programming installed. THen it went on to ask all the questions like, "Change Rev Limiter? Y to change, N to keep stock." Even though I had changed it earlier. Maybe I should just change it all back to stock then reprogram it all over?
Re: Hypertech Question Might be different for 2001's. I have a 1999 and I can just change what I want after I have already installed it.
In your exmaple: if it ask to change rev-limiter, if you say "y" does it show the value you selected previously? It may do this instead. I cannot remember but I know I did not have to re-enter my previous selections. It just showed them to me.
Sorry for the confusion.
- Tom
In your exmaple: if it ask to change rev-limiter, if you say "y" does it show the value you selected previously? It may do this instead. I cannot remember but I know I did not have to re-enter my previous selections. It just showed them to me.
Sorry for the confusion.
- Tom
Re: Hypertech Question Thanks LV Hawk. I knew the HPP3 remembered your changes when you go back to make additional changes. Just forgot how it walked you through the program.
- Tom
<img src="gr_grin.gif" border="0">
- Tom
<img src="gr_grin.gif" border="0">
