AFTICA

iTrader: (8)

F8LPONY - Please let me know if you cure it with Edit.It sounds like the same problem I'm having & I don't want to pay for Edit then find out it's not going to cure the L/U problems

98TAauto

iTrader: (2)

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by AFTICA:
<strong>F8LPONY - Please let me know if you cure it with Edit.It sounds like the same problem I'm having & I don't want to pay for Edit then find out it's not going to cure the L/U problems</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">looks like LS1 edit is my last resort on this... tried switching the ends and etc... still does the crap off and on.. anyone know if this hurts the tranny??? some days im fine, other dats it does it once every 30 mins or so... almost like its on a time schedule..

i may get the edit anyway, cause man i can always use it!!! and ill probably sell my HPP3 so the ls1 edit ends up only costing 300 or so for me <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

98TAauto

iTrader: (2)

hey Ryan or Pontiaddict:

so if i go out and atap my car.. if i watch the current total misfires parameter, when it reaches 45 then thats when my verter will unlock?? so in other words i can actaully determine thats the prob??

im gonna get ls1 edit, but i wanna check on atap to see if thats it for sure...

and pontiaddict, to get this to stop i just enter the seetings you have above?? <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> let me know if i understood this ok

pontiaddict

F8LPONY
Did you turn the PO 300 code off or change the temp settings for the misfire detection?If you only turned the PO 300 off that doesnt fix the converter problem! What you need to do is go into the Diagnostic section of LS1_Edit and change the misfire temp settings to begin @ 140 and end @ 139 degrees . That should work! It did for me. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

Ryan K

iTrader: (11)

looks like you got it all down straight. I am not 100% the number is exactly 45, but its close to it. I would say 39-49 area. The parameter is correct, current total misfires.

Ryan <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />

98TAauto

iTrader: (2)

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Ryan Karasek:
<strong>looks like you got it all down straight. I am not 100% the number is exactly 45, but its close to it. I would say 39-49 area. The parameter is correct, current total misfires.

Ryan <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">thanks alot, if it wasnt raining here now would go out and try the thing.... ill let ya know what it shows up on atap... but ill expect the unlocking around 35-45 give or take

Reboot

iTrader: (5)

This is getting good.....TTT

F8L Z71

Pontiaddic,
Awesome, thx for the tip. I'll try it out as soon as the rain here stops.

Man, this is gonn abe soo cool when this problem is gone. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

F8L Z71

Pontiaddic,
Awesome, thx for the tip. I'll try it out as soon as the rain here stops.

Man, this is gonn abe soo cool when this problem is gone. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

pontiaddict

no problem....hope it works for you. I was really getting annoyed at mine but this fixed it.