LC-1 Software
LC-1 Software Do youhave to use this software when using the LC-1 w/ HPTuners? Also how do you change this:
output of the Wideband side should be set to 1/12 or 1/6th second output-update rate
output of the Narrowband side should be set to 1/6th second output-update rate(best simulate the response of the stock o2 sensor
Thanks
Dave
output of the Wideband side should be set to 1/12 or 1/6th second output-update rate
output of the Narrowband side should be set to 1/6th second output-update rate(best simulate the response of the stock o2 sensor
Thanks
Dave
TECH Fanatic
Joined: Aug 2005
Posts: 1,691
Likes: 1
From: Sunny London, UK
efilive is calibrated to work with the LC-1 as it comes out of the box.
If its factory reset, or power cycled etc. No problem it works ok.
Some guys suggest to change the update speed to match stock NB. But mines ok at realtime speed. YMMV.
If its factory reset, or power cycled etc. No problem it works ok.
Some guys suggest to change the update speed to match stock NB. But mines ok at realtime speed. YMMV.
Originally Posted by WS6FirebirdTA00
i take it you got that from soundengineers writeup?
yeah i did, i used his write up and also made a bx like his but smaller! His setup rocks big time. i got it calibrated and everything but just could not fined anywhere how to chage it.
Dave
Open up the LM programmer, go to analog out 1, and click on the advanced box. You'll see it under there. There aren't many things you can do.
FWIW, I set mine to 1/6th second, and have a linear output from 11-17 AFR (0-5V). Works great for me.
FWIW, I set mine to 1/6th second, and have a linear output from 11-17 AFR (0-5V). Works great for me.
Originally Posted by MeentSS02
Open up the LM programmer, go to analog out 1, and click on the advanced box. You'll see it under there. There aren't many things you can do.
FWIW, I set mine to 1/6th second, and have a linear output from 11-17 AFR (0-5V). Works great for me.
FWIW, I set mine to 1/6th second, and have a linear output from 11-17 AFR (0-5V). Works great for me.
Dave
Yes...the LM programmer is in that bundle somewhere...depending on when you got your LC-1, Innovate might even have some updates for you on their website. They did a recent LC-1 firmware update and upgrade to their logworks program...
Either way, load the software on your comp and hook up to the LC-1. If you have problems connecting, let us know. Early firmware versions didn't like to communicate very well.
Either way, load the software on your comp and hook up to the LC-1. If you have problems connecting, let us know. Early firmware versions didn't like to communicate very well.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote Cool...I think the most up-to-date firmware is 1.00a or something like that...when you go to connect, just make sure you run from the serial port of your laptop to the OUT headphone jack thingie, and then put the terminator plug in the IN headphone jack thingie, and make sure the unit has power. You can't even open up the LM Programmer unless there is a good communication line from your computer to the LC-1. Kinda frustrating when you are just wanting to know what you can even adjust.
