PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

HELP! HELP! I am FREAKING OUT MAN!!!!!

Thread Tools
 
Search this Thread
 
Old 04-12-2002, 09:58 PM
  #1  
Guest
Guest
 
Posts: n/a
Default HELP! HELP! I am FREAKING OUT MAN!!!!!

Just took the car to the track and my 3rd gear is not kicking in, it hits the rev limiter at 6800 and nothing is happening, I then let go of the pedal and the rpm drops and then it kicks in. What the hell is happening? I ran it twice on od and d. I hit 12.9 and a 13.1, same time I ran before I got the T1 cam and the LT mac headers, plus PCM tuning. Is the converter not locking up or what is going on? Any help or suggestions would help...I was hoping for low 12's possibly a 12 flat, but now this is really scaring me. <img border="0" alt="[whiner]" title="" src="graemlins/gr_cry.gif" />
Old 04-12-2002, 10:30 PM
  #2  
TECH Fanatic
 
PaiN's Avatar
 
Join Date: Nov 2001
Location: Katy, TX
Posts: 1,497
Likes: 0
Received 0 Likes on 0 Posts

Default Re: HELP! HELP! I am FREAKING OUT MAN!!!!!

I would start by dropping the shift point down.

see if it makes the shift when its not so close to the rev limiter.

<small>[ April 12, 2002, 10:31 PM: Message edited by: PaiN ]</small>
Old 04-12-2002, 11:08 PM
  #3  
Guest
Guest
 
Posts: n/a
Default Re: HELP! HELP! I am FREAKING OUT MAN!!!!!

Thanks Pain.......I am taking the car Monday to MTI, the thing is when I am at normal speed it shifts, but at WOT it doesn't. It just felt very weird, I am going to ask about the shifting point on it, after they take a look at it. I thought my tranny was going to pop. Thanks again...Manny <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> <img border="0" alt="[Pontiac]" title="" src="graemlins/formula.gif" />




All times are GMT -5. The time now is 02:52 PM.