Need checklist for ls1edit, first time user!!
Thread Starter
On The Tree
Joined: Jan 2002
Posts: 181
Likes: 0
From: LUBBOCK
Need checklist for ls1edit, first time user!! Well jason and I have ordered ls1edit and I wanted to see what kind of checklist I could get so that everything gets covered when we get it. here is a list of mods that I will have when the ls1edit arrives.
MMS stage I heads (milled .030 inches)
C1 hammer cam
Pro-torque 10" converter (3400 or so i believe, suppose to be their best)!!! going in today!!
rebuilt 4L60I
Mac w/ORY-pipe
Borla
lid/filter
175 thermostat
150 shot of nitrous
panhard rod
lca's
eibach pro kit springs
17x9.5 rims with 275/40/17
That is all that i can think of right now... i believe that my car is running really rich!! i autotapped my car one time and i think the O2 reading were like .990 or so... i've had a couple friends tell me that i have actually blown a flame out of the exhaust before!! i use to have ported maf end, but has since gone to stockers... i think we will be porting the ends when the heads/cam go on this weekend... i ususally blow alot of black smoke out my exhaust... so tell me what all i need to do with the ls1edit to get the most out of it!! Thanks... <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
MMS stage I heads (milled .030 inches)
C1 hammer cam
Pro-torque 10" converter (3400 or so i believe, suppose to be their best)!!! going in today!!
rebuilt 4L60I
Mac w/ORY-pipe
Borla
lid/filter
175 thermostat
150 shot of nitrous
panhard rod
lca's
eibach pro kit springs
17x9.5 rims with 275/40/17
That is all that i can think of right now... i believe that my car is running really rich!! i autotapped my car one time and i think the O2 reading were like .990 or so... i've had a couple friends tell me that i have actually blown a flame out of the exhaust before!! i use to have ported maf end, but has since gone to stockers... i think we will be porting the ends when the heads/cam go on this weekend... i ususally blow alot of black smoke out my exhaust... so tell me what all i need to do with the ls1edit to get the most out of it!! Thanks... <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Re: Need checklist for ls1edit, first time user!! first thing is to get your LTRIMs under control. ATAP the car and adjust them through your MAF rate or scale your injectors if you changed them.
You may want seperate programs for NOS and NA running when you go to fine tune.
You may want seperate programs for NOS and NA running when you go to fine tune.
