Having the car programmed this week - any suggestions?
05-12-2002, 01:41 PM
#1
Junior High Director
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: OC, CA
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
Having the car programmed this week - any suggestions? Guys,
Just put a Vig 3200 and Transgo 3 washer in the car...the TM is so bad that after th e1-2 shift it pulls all the timing and a bunch of fuel...so I'm having the PCM programmed here locally (Z Industries)...aside from removing the TM and adding timing, etc...what else should I have done? Where should I have the shift points changed to? Any suggestions would be appreciated...
Also, my car is an '01 Z28 A4 with:
Vig 3200/ Transgo 3 washer
MTI lid
SLP 85mm MAF
Ported TB
Y-pipe with cutout
160 stat (this week)
TIA
Joe
Just put a Vig 3200 and Transgo 3 washer in the car...the TM is so bad that after th e1-2 shift it pulls all the timing and a bunch of fuel...so I'm having the PCM programmed here locally (Z Industries)...aside from removing the TM and adding timing, etc...what else should I have done? Where should I have the shift points changed to? Any suggestions would be appreciated...
Also, my car is an '01 Z28 A4 with:
Vig 3200/ Transgo 3 washer
MTI lid
SLP 85mm MAF
Ported TB
Y-pipe with cutout
160 stat (this week)
TIA
Joe
