PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

Need Help with DTC 118

Thread Tools
 
Search this Thread
 
Old 05-14-2002 | 09:08 PM
  #1  
FigsZ28's Avatar
Thread Starter
TECH Apprentice
iTrader: (70)
 
Joined: Nov 2001
Posts: 398
Likes: 0
From: Texas
Default Need Help with DTC 118

Ok I looked up the code and replaced the sensor on the head and sensor on the radiator. My temp gauge on the dash works and when i drain the coolant to see if the radiator sensor works I get the low coolant light telling me that that sensor works. But I still get code 118. I also looked at my engine temp via ATAP and saw that the computer is reading the engine temp as -38. Becuase of this I believe this is the reason my car is only getting 13 to 15 degrees of timming at wot. Ive also checked the fuses in the engine bay and found nothing wrong with them. I recently had custom tunning aby Ed Write but sent it back to get it reflashed back to stock because I changed my heads and cam combo and was gonna get Thunder to do LS1 edit for me. Thanks for any help in advance



Quick Reply: Need Help with DTC 118



All times are GMT -5. The time now is 03:50 AM.