PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

Pulled a few codes from a buddy's '99 Chevy van...

Thread Tools
 
Search this Thread
 
Old 12-31-2005, 08:47 PM
  #1  
TECH Junkie
Thread Starter
iTrader: (10)
 
Loudmouth LS1's Avatar
 
Join Date: Nov 2002
Location: Deerfield Beach, FL
Posts: 3,672
Likes: 0
Received 0 Likes on 0 Posts

Default Pulled a few codes from a buddy's '99 Chevy van...

What exactly do they mean?

P0141 HO2S Heater Circuit Bank 1 Sensor 2 - (I know this is one of the o2 sensors, but exactly which one)?

P0171 Fuel Trim System Lean Bank 1 - (Not really sure what this one means)

P0174 Fuel Trim System Lean Bank 2 - (Not really sure what this one means either)

So i'm just assuming that those last 2 codes are tellin him he's running lean on both sides? and the first one is one of the o2 sensors, he has a stutter/hesitation, just tryin too help him troubleshoot it, thanks guys!
Old 12-31-2005, 09:21 PM
  #2  
TECH Veteran
iTrader: (19)
 
2002_Z28_Six_Speed's Avatar
 
Join Date: Aug 2005
Location: Wash, DC
Posts: 4,539
Likes: 0
Received 1 Like on 1 Post

Default

I think that means you should have to replace the sensors or check to make sure they are propertly connected. That should make the other two codes go away. What do you other guys think? I am no wizard.

It thows a lean trim is the trim value goes higher than +25% fuel trim.
Old 01-01-2006, 02:02 PM
  #3  
10 Second Club
iTrader: (19)
 
04BlackGmc's Avatar
 
Join Date: Nov 2003
Location: STL
Posts: 3,494
Likes: 0
Received 0 Likes on 0 Posts

Default

Heated o2 Sensor Bank 1 side of the motor Oxygen sensor after cat is throwing a code.

Usually if both Fuel Trims are set at the same time its usually MAF.




All times are GMT -5. The time now is 12:14 PM.