Autotap & LS1Edit Data, need help tweaking
Thread Starter
LS1Tech Premium Sponsor
iTrader: (4)
Joined: Nov 2001
Posts: 4,229
Likes: 4
From: Texas!
Autotap & LS1Edit Data, need help tweaking Here's the excel file of autotap we ran on Tommy's car last night. The car is still shifting low, I'm going to have to keep moving up the 1-2 & 2-3 shifts, but we're getting knock retard & I dont know that I'm really happy with the timing either. You'll also notice tommy's car only shows 92% throttle when its wide open, I'll fix that asap <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Excel Data File
Here's the LS1 file
http://www.jperacing.com/tommyEDIT3.ls1
Where should I go from here? The car is running the Hammer with MMS stage 1 heads <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Jason
<small>[ May 24, 2002, 08:30 AM: Message edited by: Jason 98 TA ]</small>
Excel Data File
Here's the LS1 file
http://www.jperacing.com/tommyEDIT3.ls1
Where should I go from here? The car is running the Hammer with MMS stage 1 heads <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Jason
<small>[ May 24, 2002, 08:30 AM: Message edited by: Jason 98 TA ]</small>
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
