How to adjust W.O.T. timing with edit?
Thread Starter
Launching!
Joined: Mar 2002
Posts: 229
Likes: 0
From: Amarillo
How to adjust W.O.T. timing with edit? How do adjust your timing at w.o.t. edit? Jayson at MTI sugested I remove 3 degrees of timing at w.o.t. when I run my NX 150 shot. So I want to make me a file to run at the track.
You have on the left .08 to 1 gm/cyl and 400 to 8000 rpm on the top for both low and high octane.
Any help would be greatly appreciated.
Thanks
You have on the left .08 to 1 gm/cyl and 400 to 8000 rpm on the top for both low and high octane.
Any help would be greatly appreciated.
Thanks
Re: How to adjust W.O.T. timing with edit? pick around .6 and up. I start with .6 at 2800 rpms....left click the mouse one time.....then pick 1.2 at 6800 rpms while holding down the shift key. This will turn form .6-1.2 blue. Bottom right select "use selected sells only" and in the window just above that put in "-3" and click add value. That will pull 3 degrees from all those cells. Then on the left select "apply changes" and save new file
