02 Z06 Torque Management
Thread Starter
Teching In
Joined: Jul 2002
Posts: 24
Likes: 0
From: Right Coast, USA
02 Z06 Torque Management The stock programming has Torque Management set at 350 ft-lbs. The car is supposed to be rated at 400 ft-lbs and when I dynoed bone stock I was at 344 ft-lbs at the rear wheels. An airbox with a lenaer A/F ratio brought me up to 350 ft-lbs at the rear wheel.
I am surprised that the Torque Management is set at only 350 ft-lbs. I would have to think that would cause problems with 02 Z06 cars with minor bolt-ons. Maybe I should raise the "Max Torque" field in LS1Edit to something like 375 ft-lbs?
I am surprised that the Torque Management is set at only 350 ft-lbs. I would have to think that would cause problems with 02 Z06 cars with minor bolt-ons. Maybe I should raise the "Max Torque" field in LS1Edit to something like 375 ft-lbs?
