Hypertech problem....
Thread Starter
Teching In
Joined: Jul 2002
Posts: 45
Likes: 0
From: Southwick,MA
Hypertech problem.... I have a 2000 firehawk that was in a pretty severe accident but has since been repaired. The car was programmed with the hypertech programmer before the accident. Between the time of the accident and now the car was at the dealer and I'm pretty sure the computer was plugged in and reset, etc. Well anyhow I go to plug my hypertech back in to repgram the car and it tells me that calibration can not be found and that I should contanct hypertech. well it is the weekend so I will have to wait till monday but does anyone know what has happened or if there is anything I can do to remedy the problem?
TECH Enthusiast
Joined: Jul 2002
Posts: 731
Likes: 0
From: dyersburg,tn
Re: Hypertech problem.... A friend of mine had a new motor put in his z28 buy the dealer they reflashed his computer & had to have hypertech redo his programmer his did the same thing yours is doing.
Staging Lane
Joined: Dec 2001
Posts: 51
Likes: 0
From: Ruskin, Florida
Re: Hypertech problem.... Most likely you will have to ship your programmer to Hypertech to be reset. Although it takes a few days, it doesn't cost much (shipping), and they ship it back to you. Give them a call, and they will set you up. <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
