first dyno run
Thread Starter
On The Tree
Joined: Dec 2001
Posts: 140
Likes: 0
From: Iowa
first dyno run well Cerra racing & fabrication had a dyno day today and a few of us went to Rock Island Ill.i ran 2 pulls and the 1st one I ran a power 316.9 torque was 338.5
2nd run was power 320.1 torque 343.1
and then factor in the drivetran loss I have a M-6
how do you do that any way. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
<small>[ August 24, 2002, 04:01 PM: Message edited by: edss01 ]</small>
2nd run was power 320.1 torque 343.1
and then factor in the drivetran loss I have a M-6
how do you do that any way. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
<small>[ August 24, 2002, 04:01 PM: Message edited by: edss01 ]</small>
On The Tree
Joined: Jun 2002
Posts: 152
Likes: 0
From: Fort Wayne, IN
Re: first dyno run well you just factor in about 18% loss for the drivetrain. i would have guessed your #'s would have been higher for the mods you have. i put out 307.8hp at the rear wheels with an mti lid and 2500 miles on my car. and it was 98 deg in the dyno room and humid as hell
(316.6*.18)+316.6 will give you the approx. hp at the crank
(316.6*.18)+316.6 will give you the approx. hp at the crank
Thread Starter
On The Tree
Joined: Dec 2001
Posts: 140
Likes: 0
From: Iowa
Re: first dyno run Is it 18% on M-6 they were telling me 15 on stick.The twin turbo Trans Am was above 500 and the super charged camaro wasent to far behind so I looked bad no matter what I had. My second run was 320 <img border="0" title="" alt="[Embarrassed]" src="gr_emb.gif" />
<small>[ August 24, 2002, 10:18 PM: Message edited by: edss01 ]</small>
<small>[ August 24, 2002, 10:18 PM: Message edited by: edss01 ]</small>
