MAFT Confusion? ver 5.2
MAFT Confusion? ver 5.2 Lets say I'm running rich at cruise..
I want to set my MAFT base switch at (E) 10% lean?
Lets say I'm running lean at WOT
I want to set my MAFT WOT switch at (3) 6% rich
Am I doing this right or do I need to go the other way????
HELP PLEASE
John
I want to set my MAFT base switch at (E) 10% lean?
Lets say I'm running lean at WOT
I want to set my MAFT WOT switch at (3) 6% rich
Am I doing this right or do I need to go the other way????
HELP PLEASE
John
TECH Addict
Joined: Dec 2001
Posts: 2,850
Likes: 0
From: Plainville,MA
Re: MAFT Confusion? ver 5.2 http://www.c5forum.com/diy/ltft.php
I used this to help me tune ! <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
I used this to help me tune ! <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Re: MAFT Confusion? ver 5.2 Thanks I wanted to make sure I had it right. I reset my computer 50 miles back and set the maft to 0/0 Today I got the burn your eyes rich inside the garage. I need to get my buddys laptop and do some logging but this will work for now. I'll just dial it lean and drive <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Re: MAFT Confusion? ver 5.2 You really need to autotap before making any changes. I tuned my base first, which ended up 10% rich on the base. I didn't have time to tune WOT, but I figured since it was good last time I'd set it 10% lean to offset. Well after a few days I got to autotap again and I got .800 O2s. <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> Now I have it at 2% lean WOT and I'm hoping I'm about right. Last I autotapped was 4% WOT and I was at .870s. It sucks when you don't own an autotap or a laptop.
