resetting SES light
resetting SES light what are the options for getting rid of an SES light after replacing 2 bad injectors and plugs? I'd like to find a way without having to spend more money. Does disconnecting the battery work every time?
thanks,
Eric
thanks,
Eric
Re: resetting SES light 1. Turn key on but don't start car.
2. Pull PCM BAT and PCM IGN fuses in engine compartment.
3. Wait a few minutes.
4. Turn ignition off.
5. Replace fuses.
The car will stumble a little, but will re-learn the idle..
I would get a computer to read you DTC's to make sure there is not something else wrong...
2. Pull PCM BAT and PCM IGN fuses in engine compartment.
3. Wait a few minutes.
4. Turn ignition off.
5. Replace fuses.
The car will stumble a little, but will re-learn the idle..
I would get a computer to read you DTC's to make sure there is not something else wrong...
