LS1Edit - adjusting cold start fuel
Thread Starter
TECH Enthusiast
iTrader: (7)
Joined: May 2002
Posts: 747
Likes: 0
From: East Tennessee
LS1Edit - adjusting cold start fuel When my car first starts it dumps alot of fuel for the cold start. If you stand near the car you and your clothes will stink of gas. EFILive/AutoTap show AFR of 14.6 at idle. And I have ORP and a TR224 LSA112 cam. I am sure that those two things account for allot of the fuel smell.
Is there anything I can do for this with LS1Edit, like reducing the amount of fuel used on cold starts? Or do I just need to put the cats back on?
Is there anything I can do for this with LS1Edit, like reducing the amount of fuel used on cold starts? Or do I just need to put the cats back on?
Re: LS1Edit - adjusting cold start fuel There is a table for cranking VE. You might try that and see if it does the trick. I've wondered about it but have not had time to experiment.
