What PIDS
Thread Starter
TECH Apprentice
Joined: Feb 2005
Posts: 364
Likes: 0
From: Newark,DE
What PIDS Getting ready for a D1SC install and cam install.
I am going to do the cam first and tune so that it runs properly. Just to check it out and make sure all is good.
After that I am going to install the blower, injectors, pump, ect...
Put down a basic tune so it is drivable to the dyno for actual tuning.
My question is this, what PIDS should I log now so I have a record to tune for when I am done doing each step of the install.
Thanks,
Dave
I am going to do the cam first and tune so that it runs properly. Just to check it out and make sure all is good.
After that I am going to install the blower, injectors, pump, ect...
Put down a basic tune so it is drivable to the dyno for actual tuning.
My question is this, what PIDS should I log now so I have a record to tune for when I am done doing each step of the install.
Thanks,
Dave
Staging Lane
Joined: Oct 2005
Posts: 91
Likes: 0
From: GMT-10 Hours
Thread Starter
TECH Apprentice
Joined: Feb 2005
Posts: 364
Likes: 0
From: Newark,DE
Originally Posted by frknlo
Heres the one I followed:
http://www.efiforum.iqd.co.nz/showth...hlight=logging
http://www.efiforum.iqd.co.nz/showth...hlight=logging
Thanks,
check the AutoVE tutorial that you can download from www.efilive.com. I used that to tune my incon car. very easy but nearly impossible to tune the boost tables on the street. 
