How much change in the Timing Advance ...
12-02-2002, 12:38 AM
#1
TECH Apprentice
Thread Starter
Join Date: Jan 2002
Location: Louisville, KY
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
How much change in the Timing Advance ... did you put into the table in LS1 Edit without causing any problems and Knock Retard. I've added 2 degrees across the board and am considering adding 1 more.
In the meantime, I'm looking through the entire table seeing where I want to possibly make individual changes to the table.
So what technique and limits in the ITA table worked for you????
In the meantime, I'm looking through the entire table seeing where I want to possibly make individual changes to the table.
So what technique and limits in the ITA table worked for you????
12-03-2002, 12:30 AM
#2
Re: How much change in the Timing Advance ... Making block adjustments to your timing table is fine, but can put some quirks into your car. With low rpm, high air flow timing (ie 6th gear on the freeway) this timing is particularly sensitive, and should be left at the stock limits or slightly lower. It resides in the lower left of your table.
~.4 g/cyl - up to 2000 rpm.
~.4 g/cyl - up to 2000 rpm.
