Help Please
Thread Starter
Teching In
Joined: Nov 2001
Posts: 34
Likes: 0
From: Plano
Help Please I had a SES light come on, I went to auto zone and had them pull the code. 1410 in there system says it is an Aux. air cleaner inlet control circuit problem. But 1410 on the SES translator on this site said it was fuel tank system pressure
Jason
<small>[ December 13, 2002, 03:09 PM: Message edited by: SLEEPR ]</small>
Jason
<small>[ December 13, 2002, 03:09 PM: Message edited by: SLEEPR ]</small>
TECH Addict
iTrader: (6)
Joined: Dec 2001
Posts: 2,028
Likes: 0
From: sojourning....looking for my city whose builder and maker is God.
Re: Help Please In LS1Edit for my f-body it list code P1410 as “fuel tank pressure system”
P0410 is “air system” Hope this helps, Becky
P0410 is “air system” Hope this helps, Becky
Thread Starter
Teching In
Joined: Nov 2001
Posts: 34
Likes: 0
From: Plano
Re: Help Please </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Lady Redhawk:
<strong>In LS1Edit for my f-body it list code P1410 as ?fuel tank pressure system?
P0410 is ?air system? Hope this helps, Becky</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Thank you very much.
So I guess I need to go back to auto zone and make sure which is the correct code. I also guess it could be my gas cap for the fuel tank pressure system. but I don't know what the other could be.
Thanks again
Jason
<strong>In LS1Edit for my f-body it list code P1410 as ?fuel tank pressure system?
P0410 is ?air system? Hope this helps, Becky</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Thank you very much.
So I guess I need to go back to auto zone and make sure which is the correct code. I also guess it could be my gas cap for the fuel tank pressure system. but I don't know what the other could be.
Thanks again
Jason
