Cam specs inside and cam surge ?'s

Reply Subscribe

Thread Tools

Search this Thread

Feb 14, 2006 | 08:16 PM

INFERNO

Thread Starter

Teching In

iTrader: (2)

Joined: Nov 2005

Posts: 24

Likes: 0

From: Hammond

Cam specs inside and cam surge ?'s

I am planning on getting this cam for my 2001 Ls1 motor in my 93 Z M6- (SI2 224 224 .581 .581 112) I am hoping with the ls6 intake, pacesetter, ported tb, underdrive, and all bolt on's to reach 400 RWHp and about 380 torque. The only question is that I had a h/c LT1 car with a spec stage 4 (unsprung disc) and M6 and no tuner could get rid of the cam surge with a CC306 cam the surge was so bad that i pulled the cam. I want to know before I go this route how much can cam surge be eliminated. I am planning on having speed inc do the tune but also want another opinon. I am also going with the sprung spec stage 3+ clutch. Thanks in advance.

Feb 14, 2006 | 10:05 PM

WS6FirebirdTA00

TECH Senior Member

iTrader: (33)

Joined: Mar 2003

Posts: 8,319

Likes: 1

From: North Carolina

that cam should drive like stock, my 230/232 does (except for the added power

) and i still have to get some tuning done on it, just havent had much time lately

Feb 14, 2006 | 10:09 PM

Blacker

TECH Fanatic

iTrader: (3)

Joined: Aug 2003

Posts: 1,670

Likes: 1

From: Austin, Texas

I have Furtal 228/228 0.575"/0.575" 114LSA and it drives great and took awhile to nail the tuning down. The LC-1 Wideband/HP Tuners 2.0 really made tuning that much easier.