Autotap help needed
Autotap help needed Just bought ATAP enhanced for my '02 Z and have been trying to log some data to get my STFT & LTFT averages.
When I downloaded into excel, only 86 or so of the 2900 rows had fuel trim cell numbers between 4-16. <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
Most were in the 100s and even 1,000s and 10,000s.
Anyone else have this problem??? Makes me wonder if even the seemingly useable FTC rows are working.
FYI -
I set up my config to record STFT% for bank 1 and bank 2, and LFTF% for bank 1 and bank 2. I also recorded RPM and fuel trim cell.
When I downloaded into excel, only 86 or so of the 2900 rows had fuel trim cell numbers between 4-16. <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
Most were in the 100s and even 1,000s and 10,000s.
Anyone else have this problem??? Makes me wonder if even the seemingly useable FTC rows are working.
FYI -
I set up my config to record STFT% for bank 1 and bank 2, and LFTF% for bank 1 and bank 2. I also recorded RPM and fuel trim cell.
Teching In
Joined: Jan 2003
Posts: 7
Likes: 0
From: San Antonio, TX
Re: Autotap help needed I have had this, when I've add more things to monitor. Do not know why either. I will try again with Virus stuf off and nothing else running. Do not know how many things are too many.....maybe somebody else knows.
