I just installed a 2800 Fuddle torque converter.
Everything is good except for the idle is fluctuating when you blip the throttle.
For example, I was in the drive thru at McDonalds this morning and as I pushed the peddle to roll forward a bit, the tach fell down to 200rpm and slowily restabled itself at 550rpm.

Can I tune this out?

 

First Off I Am Very New To Hptuners ... But Id Try The Throddle Cracker Table I Had A Simlar Prob And That Fixed It For Me My Car Had Some Strange Values In The Lower Values And It Would Stall If You Hit The Breaks After A Rev But After That It Went Away

..good Luck