Logging with Autotap
Thread Starter
Launching!
iTrader: (18)
Joined: Mar 2003
Posts: 232
Likes: 0
From: Jacksonville, Florida
Logging with Autotap Its time to do some logging to see what all is going on with my car. The car runs fine, rough idle, no driveability issues. Currently has stock programming, SLP LTs, dynamouth, no cats, o2 simms, egr removal, TCI SSF3500, lid.. etc..
EGR is throwing a code, that is obvious. Pretty much what I am asking is: What parameters are most critical to monitor and what should their variables be?
I'll do some logging and post up some results - I'd like to get your input on what tuning needs to be done!
Thanks,
David
EGR is throwing a code, that is obvious. Pretty much what I am asking is: What parameters are most critical to monitor and what should their variables be?
I'll do some logging and post up some results - I'd like to get your input on what tuning needs to be done!
Thanks,
David
Try starting with these.
Engine Speed
Vehicle Speed
Ignition Timing Advance
Knock Retard
Engine Coolant Temp
Intake Air Temp
O2 Sensor B1S1
O2 Sensor B2S1
LTerm Fuel Trim B1
LTerm Fuel Trim B2
Map
MAF Flow Rate
Engine Speed
Vehicle Speed
Ignition Timing Advance
Knock Retard
Engine Coolant Temp
Intake Air Temp
O2 Sensor B1S1
O2 Sensor B2S1
LTerm Fuel Trim B1
LTerm Fuel Trim B2
Map
MAF Flow Rate
