p0343
Thread Starter
11 Second Club
iTrader: (16)
Joined: Aug 2005
Posts: 1,058
Likes: 0
From: Catasauqua, PA
p0343 im throwing a dtc for a high voltage of the cam sensor....the wire got cut we fixed it but im still throwing the code (the tech 2 says its not old that it does it every start). im guessing its not fixed good enough or it has a small cut in another place. i know it makes it hard to start some times. Will this code make my car run in limp mode and affect it WOT? Please help ASAP
Thread Starter
11 Second Club
iTrader: (16)
Joined: Aug 2005
Posts: 1,058
Likes: 0
From: Catasauqua, PA
Originally Posted by turbotacoma
You have the wires backwards......trust me I know this first hand......You have 3 wires going to it.....you got them crossed....I had the same problem.
Originally Posted by GDM Z28
ok ill check that....but will that affect WOT driving?
Thanks,
Kris
Thread Starter
11 Second Club
iTrader: (16)
Joined: Aug 2005
Posts: 1,058
Likes: 0
From: Catasauqua, PA
Originally Posted by KrisR
Sorry to bump an 'old' thread, but what was the culprit? I'm getting the same code.....
Thanks,
Kris
Thanks,
Kris
