I've been working with EFILive 7.3 and logging LTFT's with DFCO and PE disabled in SD mode. I've managed to get the trims from -10 + averages down to below -5. So really two questions.

1: When working with EFILive there are 3 buttons for figures. Average, minimum and maximum LTFT's. Do I want to only look at the values under the average button?

2: Once getting the trims within -5 and 0 I've noticed that alot of the cells are not green but orange and red. If I click the max button there are trims between 0 and +5. On the minimum side there are alot of green cells with some ranging -6 to 0. Getting confused on what is what here or maybe just thinking to hard but what is what here. I do want between -5 and +5 and not -.5 and +.5, correct?

Sorry for the newbie question but I've just begun.

 

1. For tuning the VE you wanna look at the average.

2. Ideally you would wanna be running ltft's -5 to 0, but -5 to +5 is good. If you use the excel ve table thats floating around here you should be able to get them +-1-2