Why do my O2s keep flatlining?
Here's a picture of what my O2s looked like before change the inj. pulse table. The WB is dead on until hitting FTC 19, then it's about a point low. For me, changing the proportional fueling tables had no effect.
That's wierd... I don't really see much similarity between your scan and his though, yours completely flat line.
BTW, 42lb injectors in a car that idles that smooth at 600-650RPM, and with a stock thermostat?
Or was this before some other mods?
BTW, 42lb injectors in a car that idles that smooth at 600-650RPM, and with a stock thermostat?
Or was this before some other mods? Yea, I think there's two issues in this thread.
1) I believe Dixit's issue was O2s flatlining on decel or off throttle.
2) Billiumss seems to have an O2 flatlining issue 'mostly at idle'.
1) I believe Dixit's issue was O2s flatlining on decel or off throttle.
2) Billiumss seems to have an O2 flatlining issue 'mostly at idle'.
Originally Posted by SMOKINV8
BTW, 42lb injectors in a car that idles that smooth at 600-650RPM, and with a stock thermostat? Or was this before some other mods?
Or was this before some other mods?
