Just need to clarify tables for EFILive (Maf stuff)
07-11-2006, 05:49 PM
#1
On The Tree
Thread Starter
Join Date: Dec 2005
Location: South Dakota
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Just need to clarify tables for EFILive (Maf stuff) I'm trying to get my LTFT to steady out now to about 0 or slightly lower. If my LTFT are saying +3% everywhere pretty much, so I need to multiply the B5001 MAF Sensor Calibration by 1.03 to bring down LTFT. This is in EFILive, but want to make sure this is the right table to edit.
07-11-2006, 06:16 PM
#2
On The Tree
Thread Starter
Join Date: Dec 2005
Location: South Dakota
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Acually, stratch that. LTFT numbers are for correcting the Main VE Table and Backup VE Table (B0101 and B0103 in EFILive). So +3% LTFT would mean to add 3% to the B0101 table. Anybody want to correct me before I hurt something if that's wrong?
07-11-2006, 08:17 PM
#3
Originally Posted by Ashes
Acually, stratch that. LTFT numbers are for correcting the Main VE Table and Backup VE Table (B0101 and B0103 in EFILive). So +3% LTFT would mean to add 3% to the B0101 table. Anybody want to correct me before I hurt something if that's wrong?
