No EIO, LC1 through EGR help
No EIO, LC1 through EGR help I've got my LC1 run through my EGR connector (brown wire) and am getting flaky readings of the voltage through HPT.
I can flatline the narrowband side to read whatever I want and it works, I flatline the wideband side and it reads whatever it wants.
After warming up, Logworks sees 20.9 AFR so I think the sensor is actually working...but it's not spitting out the right voltage.
To me it seems like there is something wrong with the LC1 as it's not spitting out the right voltage on the analog outputs. DAC chip blown or something?
I can flatline the narrowband side to read whatever I want and it works, I flatline the wideband side and it reads whatever it wants.
After warming up, Logworks sees 20.9 AFR so I think the sensor is actually working...but it's not spitting out the right voltage.
To me it seems like there is something wrong with the LC1 as it's not spitting out the right voltage on the analog outputs. DAC chip blown or something?
Last edited by SICK WS 6; Jul 15, 2006 at 01:38 PM.
