Changing my tune for a stall

Reply Subscribe

Thread Tools

Search this Thread

Oct 10, 2006 | 10:14 PM

joshtownsend

Thread Starter

TECH Regular

iTrader: (16)

Joined: Feb 2005

Posts: 444

Likes: 0

From: houston dayton texas

Changing my tune for a stall

I'm going to go to a 2800stall from stock. WHAT DO I NEED TO CHANGE WITH MY LS1 EDIT?

Oct 11, 2006 | 07:23 AM

jay_99z

10 Second Club

iTrader: (5)

Joined: Nov 2003

Posts: 996

Likes: 1

From: Charleston, SC

Possibly nothing. You may need to adjust the shift points and tweak the torque management a little. I don't think the 98's had too many issues with TM. I have a friend that had some serious TM issuea after putting a converter in his 2001.

That said......I ran my 99Z28 with stock tune and 4200 stall for about 3 years....with no issues. Ran a best of 11.76 SI.

Since you have edit already.....I would just run it and see how it does. I really don't think you will have any issues.

Oct 11, 2006 | 09:50 AM

koolaid_kid

TECH Junkie

iTrader: (21)

Joined: Jul 2005

Posts: 3,023

Likes: 1

From: Indianapolis

Would the same be true with my LT1?
I'm putting a 3400 stall in it tomorrow, and I have LT1Edit.

Oct 11, 2006 | 10:10 AM

Muerte_X

Launching!

iTrader: (1)

Joined: Dec 2004

Posts: 211

Likes: 0

From: Albuquerque, NM

I have a 3800 in mine and didn't do any tuning. You should be fine, especially with a such a small converter, I'd be surprised if you even notice a difference.

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
1 / 1
Next
Last