Newbie Needs some help

Reply Subscribe

Thread Tools

Search this Thread

Oct 12, 2006 | 05:44 AM

JWG01LS1

Thread Starter

On The Tree

Joined: Sep 2006

Posts: 102

Likes: 0

Newbie Needs some help

I recently purchased a 01 z28, i have installed a slp lid, slp MAF, smooth bellow, and a loudmouth 2 cat-back. Since installing, my check engine light will come on for a day or two, then go off for a day, then come back on, so on, so on. Is this normal?? i have checked all my connections and fittings, everything looks ok. If anyone has any advice i would accept it gladly. thanks

Oct 12, 2006 | 08:04 AM

brad8266

TECH Senior Member

iTrader: (23)

Joined: Aug 2005

Posts: 8,797

Likes: 0

From: Watertown, NY

What codes are being thrown??

Oct 12, 2006 | 08:27 AM

Billiumss

TECH Addict

iTrader: (11)

Joined: Nov 2001

Posts: 2,975

Likes: 15

From: Erie, PA

If you don't have a scanner, put the stock MAF back on, remove battery cable for 1-2 minutes and go from there.

Oct 12, 2006 | 08:46 AM

foff667

LS1TECH Sponsor

iTrader: (2)

Joined: Jul 2003

Posts: 7,986

Likes: 3

From: Clermont, FL

Quote:

Originally Posted by Billiumss

If you don't have a scanner, put the stock MAF back on, remove battery cable for 1-2 minutes and go from there.

I've seen so many SLP maf cars throw those stupid Lean bank 1 bank 2 codes its not even funny

Oct 12, 2006 | 08:08 PM

JWG01LS1

Thread Starter

On The Tree

Joined: Sep 2006

Posts: 102

Likes: 0

Thanks guys for the imput. My friend used his Superchip scanner to run the DTC on my car, it said the Oxy sensor?? was bad. Anyone familar with that code?? thanks again