O2 HEATER & EVAP NOT READY

Reply Subscribe

Thread Tools

Search this Thread

Jan 3, 2007 | 07:45 PM

MSRP

Thread Starter

Teching In

Joined: Apr 2003

Posts: 19

Likes: 0

From: LITHIA SPRINGS GA

O2 HEATER & EVAP NOT READY

The O2 Heater Is That The Front Or Rear? Went To Get Emisions, O2 Heater And Evap Not Ready Come Up. I Have Ls1 Edit And Deleted The Rear O2, Tank Pressure And Air. Can You Delete All The Evap As Well. I Dont Have Cats Or An Air Pump So I Need Some Help. I Also Cut And Welded The Flages Off The Headers So Putting The Air Pump Back On Is Not An Option.

Jan 3, 2007 | 11:07 PM

Shallow Bay

TECH Resident

iTrader: (3)

Joined: Jul 2005

Posts: 878

Likes: 1

From: Twin Cities, MN

Quote:

Originally Posted by MSRP

The O2 Heater Is That The Front Or Rear?

It all depends on the code.

P0135 - driver side front
P0141 - driver side rear
P0155 - passenger side front
P0161 - passenger side rear

Quote:

Originally Posted by MSRP

Can You Delete All The Evap As Well.

I believe if you delete the following codes, you should be all set.

P0440
P0442
P0443
P0446
P0449
P1441

Jan 6, 2007 | 06:18 PM

MSRP

Thread Starter

Teching In

Joined: Apr 2003

Posts: 19

Likes: 0

From: LITHIA SPRINGS GA

O2 Heater Came Up Ready And Ga Lets 1 Not Ready Pass But I Will Try The Other Codes.

Jan 6, 2007 | 08:53 PM

Bill Bowling

TECH Addict

iTrader: (6)

Joined: Apr 2003

Posts: 2,597

Likes: 4

From: Lawrenceville, GA

I have an Inspection only tune that I use once a year. I still dread inspection time.

Bill

Jan 6, 2007 | 11:35 PM

ZL1Killa

TECH Resident

iTrader: (17)

Joined: Sep 2004

Posts: 3,747

Likes: 0

From: NC - Charlotte area

cut off all your EVAP, 02 crap (and i mean ALL of em' there are a LOT) and EGR..if you have it... then flash the tune, use the scan tool and test the readiness tests...as it won't lie to you with your scantool

i too have a 'ready' tune

Jan 7, 2007 | 05:32 AM

gametech

TECH Veteran

iTrader: (1)

Joined: Sep 2004

Posts: 4,917

Likes: 909

From: Stockbridge GA

Just remember that your code has to be set to "no", but your ses has to be set to "on". If you turn off the code and the ses, the tests will never popup complete.

Jan 7, 2007 | 09:39 PM

MeentSS02

Kleeborp the Moderator™

iTrader: (11)

Joined: Mar 2004

Posts: 10,316

Likes: 6

From: Dayton, OH

Quote:

Originally Posted by gametech

Just remember that your code has to be set to "no", but your ses has to be set to "on". If you turn off the code and the ses, the tests will never popup complete.

Exactly...any codes you need to go ready for inspection need to be set to:

"No Error Reported"
SES Enabled - "On" (NOT OFF)

The second part doesn't make intuitive sense, but trust me, it won't set a light, and the related codes go ready immediately (no driving cycles needed).