PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

Engine Sensor fuse

Thread Tools
 
Search this Thread
 
Old Feb 18, 2007 | 08:46 AM
  #1  
1hotls1's Avatar
Thread Starter
11 Second Club
iTrader: (6)
 
Joined: Jul 2006
Posts: 237
Likes: 0
From: Sibley, La
Default Engine Sensor fuse

I was having some MAF code issues and someone on here recommended checking the sensor fuse. It was blown, and after replacing it the car ran great. The problem is, it keeps blowing the fuse every few days. I can't find any wires grounded to anything. Any ideas what could cause this?
Reply
Old Feb 18, 2007 | 11:51 AM
  #2  
2001NBMZ28's Avatar
TECH Senior Member
 
Joined: Dec 2001
Posts: 5,399
Likes: 3
From: Jacksonville, FL
Default

Have you checked the 02 sensor wiring to make sure their not rubbed through/arcing anywhere? Happened to a friend of mine.
Reply
Old Feb 18, 2007 | 01:44 PM
  #3  
stone4779's Avatar
TECH Apprentice
iTrader: (2)
 
Joined: Jul 2004
Posts: 384
Likes: 0
From: Mission, TX
Default

Originally Posted by 2001NBMZ28
Have you checked the 02 sensor wiring to make sure their not rubbed through/arcing anywhere? Happened to a friend of mine.
same here...check for burnt wire under that car near the exhaust & by the primaries under the hood....sometimes they get burned through and can short stuff out..
Reply
Old Feb 18, 2007 | 02:59 PM
  #4  
1hotls1's Avatar
Thread Starter
11 Second Club
iTrader: (6)
 
Joined: Jul 2006
Posts: 237
Likes: 0
From: Sibley, La
Default

Thanks guys, I'll post up what I find.
Reply




All times are GMT -5. The time now is 05:20 AM.