PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

STS Twins

Thread Tools
 
Search this Thread
 
Old Mar 23, 2007 | 11:47 AM
  #1  
Purrvert's Avatar
Thread Starter
On The Tree
 
Joined: Dec 2004
Posts: 100
Likes: 0
From: Satellite Beach, fl
Default STS Twins

Posted this in Forced Induction Section without much response, hoping for some help in the Tuning section.

Finishing up my twin tourbo install, anyone care to share an EFILive Y body two bar tune for me to get started? PM would be nice. Thanks.
Reply
Old Mar 24, 2007 | 01:55 AM
  #2  
wait4me's Avatar
TECH Addict
iTrader: (10)
 
Joined: Feb 2003
Posts: 2,961
Likes: 2
From: warsaw, in
Default

I would send you one over, but there are just tooo many variables to get it safe on the first time with those kits. Call me on monday and i will help you out with your software setup.
Reply
Old Mar 24, 2007 | 06:50 AM
  #3  
Purrvert's Avatar
Thread Starter
On The Tree
 
Joined: Dec 2004
Posts: 100
Likes: 0
From: Satellite Beach, fl
Default

Jesse,
Plan on doing my own street tuning, looking for some basics for setting up 2bar MAP sensor, setting up 42# injectors and how early to decrease timing etc. It'll be two weeks plus before I see this car again. Right now with the stock injectors I get lean around 4500. Tried a Kenne Bell boost and made my fuel rich, 10.5, and uncontrollable at higher RPM.
Reply




All times are GMT -5. The time now is 10:40 AM.