Getting A/C to work again with BS3
Thread Starter
Teching In
Joined: Jan 2007
Posts: 24
Likes: 0
Getting A/C to work again with BS3 Ok here is the Problem, the car is a 2000 firebird, I pinned out the factory computer engine controls only, none of the other wires just the Engine management. I installed a BS3 computer and wanted to keep the A/C hooked up to the factory computer, but so far it hasn't worked, all the sensors are hooked up yet.
What I was thinking us that the factory computer dosen't know that the car is running and therfore it does not let the A/C turn on.
I was just wondering what wire or wires I have to add back to the factory computer to tell it when the car is running for the A/C to work!!
Thank You for your help again!!
What I was thinking us that the factory computer dosen't know that the car is running and therfore it does not let the A/C turn on.
I was just wondering what wire or wires I have to add back to the factory computer to tell it when the car is running for the A/C to work!!
Thank You for your help again!!
