standard drivetrain loss?
standard drivetrain loss? Whats the standard % of drivetrain loss for a naturally aspirated LS1 with standard bolt-ons?
If I'm putting 350 to the wheels, whats the approximate horsepower at the flywheel?
thanks in advance,
Tyler
If I'm putting 350 to the wheels, whats the approximate horsepower at the flywheel?
thanks in advance,
Tyler
On The Tree
Joined: Dec 2006
Posts: 123
Likes: 0
From: Palm Beach, FL
Originally Posted by SS SLP2
"about" 15 percent if 6spd 350 x 15 =402 @ fw
( I suppose as you are a short stick)
" about" 18 per if a4 350 x 18 = 413 @ fw
numbers are approximate
my .02' Johnny
( I suppose as you are a short stick)
" about" 18 per if a4 350 x 18 = 413 @ fw
numbers are approximate
my .02' Johnny
TECH Senior Member
Joined: Nov 2001
Posts: 7,036
Likes: 1
From: Lake Zurich, IL
figure 18% for auto ... and if you say "I calculated my flywheel horsepower to be xyz" near anyone that knows anything about cars prepare to be the butt of many jokes 
(unless you pull your engine, engine dyno it, then dyno through the trans and rear... it's just a guess)
(unless you pull your engine, engine dyno it, then dyno through the trans and rear... it's just a guess)
