PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

p0101 and p0102 in 1st gear

Thread Tools
 
Search this Thread
 
Old 07-17-2007 | 07:31 PM
  #1  
krobinson123's Avatar
Thread Starter
TECH Regular
iTrader: (4)
 
Joined: Jul 2007
Posts: 491
Likes: 0
From: Fort Wayne, Indiana
Default p0101 and p0102 in 1st gear

I recently bought a modded 02 Camaro a few day ago. When ever I goto WOT in first gear, as soon as it gets up around 4000 RPMs it will bog down repeatedly until i let off the gas and the SES light will come on. It is pulling a p0101 and p0102 code. Anyone know why it would be doing this? It only happens in first gear.
Old 07-17-2007 | 07:52 PM
  #2  
2001NBMZ28's Avatar
TECH Senior Member
 
Joined: Dec 2001
Posts: 5,399
Likes: 3
From: Jacksonville, FL
Default

Dunno, but they're both MAF codes - is the ENG SEN fuse OK?
Old 07-17-2007 | 08:59 PM
  #3  
wait4me's Avatar
TECH Addict
iTrader: (10)
 
Joined: Feb 2003
Posts: 2,961
Likes: 1
From: warsaw, in
Default

Unplug the maf then start the car. IF it gets better then it is probably just a bad maf, or a bad connection.
Old 07-18-2007 | 06:13 AM
  #4  
krobinson123's Avatar
Thread Starter
TECH Regular
iTrader: (4)
 
Joined: Jul 2007
Posts: 491
Likes: 0
From: Fort Wayne, Indiana
Default

Well it only happens in first gear under wide open throttle. Then once i turn the car off and wait an hour or two the light shuts off. I can't drive with the MAF unplugged, can I?




All times are GMT -5. The time now is 07:49 AM.