Tuning tool and analysis for ATAP
Thread Starter
6600 rpm clutch dump of death Administrator
Joined: Dec 2001
Posts: 4,983
Likes: 13
From: Texas
Tuning tool and analysis for ATAP You may have already seen this. I saw it posted on CF, so I decided to post it here.
http://briefcase.yahoo.com/bc/nbm_ws6/
It tells you all the other things that are going on during certain conditions..
For example K/R..It tells plots out the exact points it occurs and what cell it happened at. It is helpful for tuning certain areas, there is a whole MAF recalibration routine also.
Another user - Corvette Thrashers posted this...
I just did a soup to nuts tune on my new heads, cam, MAF, vararam, intake and exhaust with efiLive and ls1Edit. I used Oracle and developed a few scripts to calibrate the MAF so the fuel trims are correct. If anyone is interested in the scripts let me know, I'm not posting them here as I got caned the last time I posted code.
mailto:angela_andy_2000@yahoo.com
http://briefcase.yahoo.com/bc/nbm_ws6/
It tells you all the other things that are going on during certain conditions..
For example K/R..It tells plots out the exact points it occurs and what cell it happened at. It is helpful for tuning certain areas, there is a whole MAF recalibration routine also.
Another user - Corvette Thrashers posted this...
I just did a soup to nuts tune on my new heads, cam, MAF, vararam, intake and exhaust with efiLive and ls1Edit. I used Oracle and developed a few scripts to calibrate the MAF so the fuel trims are correct. If anyone is interested in the scripts let me know, I'm not posting them here as I got caned the last time I posted code.
mailto:angela_andy_2000@yahoo.com
