Another tuning newbie!!!
Thread Starter
TECH Apprentice
Joined: Oct 2002
Posts: 310
Likes: 0
From: san Antonio
Another tuning newbie!!! Okay I just installed my heads and cam, now I know that I'm getting a SES light from the computer thinking that I have a multiple cylinder misfire. How do I tune this out. And what other steps should I take to start tuning. I know that there used to be a link to a website on here on the basics of tuning, but where did it go???? I just like everybody else of course wants to get the most out of my combinations. The only thing that I have changed was my injector flow table for my new 30lb svo injectors. And raised my rev limiter and changed idle speed. Now i'm lost 
If anybody knows of any websites that would be appreciated too, I have a long time away from my car now as I'm playing in a big sand box for a bit, so I figured I should make the best of it and do some research. Thanks! 
If anybody knows of any websites that would be appreciated too, I have a long time away from my car now as I'm playing in a big sand box for a bit, so I figured I should make the best of it and do some research. Thanks! 
TECH Addict
Joined: Jul 2002
Posts: 2,261
Likes: 0
Re: Another tuning newbie!!! ok heres the Install Univ. site for tuning tuning
Here is an LS1edit.com thread that addresses misfire detection.Stars sat Nov 9 2002 and cont. to sun Nov 10 2002. big cam tuning
Here is Ken Kelly's input Ken Kelly
All you need to do is click on "Thread" to follow along on 11-10-02.
Here is the link for the ls1edit archives ls1edit archives
Good luck let us know how it turns out for you.
joel(Bink)
Here is an LS1edit.com thread that addresses misfire detection.Stars sat Nov 9 2002 and cont. to sun Nov 10 2002. big cam tuning
Here is Ken Kelly's input Ken Kelly
All you need to do is click on "Thread" to follow along on 11-10-02.
Here is the link for the ls1edit archives ls1edit archives
Good luck let us know how it turns out for you.
joel(Bink)
