01WS6/tamu

iTrader: (37)

I have an 2002 truck pcm that I flashed for an 02 hawk. I used our tech 2 and the tis 2000 system at work. The car starts runs and drives fine. However, when I try using ls1 edit to modify and upload the tune it will not attach to the oem calibration files. I reflashed it the oem way twice and have had the same thing happen twice when using edit on the same pcm. Does anybody know what may be going on or how I can fix the problem.

2xLS1

iTrader: (25)

LS1edit licesnes the VIN and the PCM. Long story short, you need to buy another license since the PCM is different.

01WS6/tamu

iTrader: (37)

Is that the case even since I am running the proversion.

2xLS1

iTrader: (25)

Don't know what you mean by pro version. LS1Edit only has vin locked version and unlimited pcm version.

01WS6/tamu

iTrader: (37)

It's the unlimited version I bought it from a member here.

2xLS1

iTrader: (25)

HAve you tried emailing carputing?

01WS6/tamu

iTrader: (37)

Not yet figured I'd check here to see if it was something I needed to do. I tried it today on a friends car and it worked perfectly, went right back to mine and it still no dice. I guess I'll drop them a line and see if that results in something.