HP tuner: SD tune questions

Reply Subscribe

Thread Tools

Search this Thread

Nov 1, 2007 | 12:21 PM

MikeC5Vert

Thread Starter

Staging Lane

iTrader: (3)

Joined: Mar 2005

Posts: 51

Likes: 0

HP tuner: SD tune questions

Hi,
I have about 1.5 year old HP tuner, the one that first released with wideband reading.
Do y'all know if this HP tuner can read and write SD tune files?

Also, I got an SD tune file from a good friend and his tune is for auto tranny. I got manual tranny. Would just copy all the tables over to my base tune do the trick to convert from auto to manual?

Thanks so much in advance!!!
-Mike

Nov 1, 2007 | 02:13 PM

exit

Launching!

iTrader: (1)

Joined: Jul 2005

Posts: 242

Likes: 0

From: Miami, FL

why dont you upgrade your software? they have the 2.2 release on HPtuners.com for current costumers..

Nov 1, 2007 | 04:02 PM

MikeC5Vert

Thread Starter

Staging Lane

iTrader: (3)

Joined: Mar 2005

Posts: 51

Likes: 0

Hi,
I did upgrade the software ...
So just upgrade the software and any HP tuner can do SD tune?
Thanks,
-Mike

Quote:

Originally Posted by exit

why dont you upgrade your software? they have the 2.2 release on HPtuners.com for current costumers..

Nov 2, 2007 | 01:04 PM

exit

Launching!

iTrader: (1)

Joined: Jul 2005

Posts: 242

Likes: 0

From: Miami, FL

Quote:

Originally Posted by MikeC5Vert

Hi,
I did upgrade the software ...
So just upgrade the software and any HP tuner can do SD tune?
Thanks,
-Mike

All you really have to do is set the MAF Fail Freq to 0 and you're basically running SD. You can also disconnect the MAF sensor and it will have the same affect.

Then tune your VE table so that there is no knock retard.... etc. etc.