Stability Track Issue!!! please help
Thread Starter
Staging Lane
Joined: Jan 2006
Posts: 99
Likes: 0
From: Edinburg, Tx
Stability Track Issue!!! please help Were trying to dyno a 2007 TBSS and the stability track goes active once we get in third gear.. how can we disable it or possible just shut it down while we dyno.. any info will be great.. thanx
You can turn it off by holding the traction control button down (located on the left side of the shifter) until "Stabiltrak Off" is displayed on the DIC. Or just pull the fuse.
Thread Starter
Staging Lane
Joined: Jan 2006
Posts: 99
Likes: 0
From: Edinburg, Tx
we already did the "hold the button until it turns off".. but as soon as 3rd gear kicks in, it sais stability track active again and it down shifts 2nd and wont let me give it any throttle or go back into 3rd gear... which one is the fuse for the stability track.. tried looking for it but no luck.. thanx again for your help
