wet behind the ears, what to do in EFILive?
wet behind the ears, what to do in EFILive? got a tame 214/224 113 +1 cam and a set of heads that are ported to around +15 to 20% of stock flow numbers. 6-speed with stock mani's.
what are the areas to shoot for (not including SD tuning of VE for a/f) to get a smooth running engine. idle will start stock but what other than iac will be helpful for fine-tuning? (timing) where in the software and what to do +/- would be helpful.
coolant temps, injector setup, air, cags, what other parameters to change??
what are the areas to shoot for (not including SD tuning of VE for a/f) to get a smooth running engine. idle will start stock but what other than iac will be helpful for fine-tuning? (timing) where in the software and what to do +/- would be helpful.
coolant temps, injector setup, air, cags, what other parameters to change??
TECH Fanatic
Joined: Feb 2004
Posts: 1,259
Likes: 0
From: Lexington, KY
There is a ton of stuff you can mess with. Best to read up on the EFI Live forum. The first thing I would do is decide what operating system to run. I upgraded mine to an 02 to make it easier to tune; there are just a few less tables you have to adjust. But it depends on what car/year you have. Your cam should be pretty easy to tune for driveability but I had to spend quite a bit of time working on the "learning" areas to get mine halfway decent. You just have to read, read, read....
