LS1TECH - Camaro and Firebird Forum Discussion
LS1-LS2-LS3-LS6-LS7 PERFORMANCE
PCM Diagnostics & Tuning
cam position sensor

PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

cam position sensor

Reply Subscribe

Search this Thread

Old

Feb 11, 2008 | 08:53 AM

#1

Thread Starter

Teching In

iTrader: (6)

Joined: Aug 2005

Posts: 44

Likes: 0

From: GOOSE CREEK

Default

cam position sensor

do these go bad, and if they do what would the results be? back fires through intake and out the exhaust. mech timing was checked and verified.
help please...

Old

Feb 11, 2008 | 09:25 AM

#2

TECH Addict

iTrader: (10)

Joined: Feb 2003

Posts: 2,961

Likes: 2

From: warsaw, in

Default

Did the problem just start? Or did it start after you did something to your engine.

Old

Feb 11, 2008 | 09:43 AM

#3

Thread Starter

Teching In

iTrader: (6)

Joined: Aug 2005

Posts: 44

Likes: 0

From: GOOSE CREEK

Default

this is an ls1 swap into an s-10,had low opil presure.pulled engine fixed ploblem,reinstalled
engine. it tries to start, even fire over then it dies. and when you try to restart it will back fire or pop through intake.

Old

Feb 11, 2008 | 09:50 AM

#4

TECH Addict

iTrader: (10)

Joined: Feb 2003

Posts: 2,961

Likes: 2

From: warsaw, in

Default

Did you reinstall the CRANK trigger wires behind the starter?

And make sure all the pink wires in the harness have 12v when key is on

Reply Subscribe

bad, cam, ls1tech, position, sensor

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 03:39 PM.