Spark Arching Issues
04-26-2008, 11:39 PM
#1
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2006
Location: Cali
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
Spark Arching Issues I have a 01 SS with MSD wires..Ever since I changed my Spark PLugs my V1 radar detector would go crazy during high rpm and WOT...So someone suggested the wiring might be bad and turns out I had two Loose spark plugs..But the wires are still arching I replaced two wires drivers side and now the other two are arching one at the coil and the other by the spark plug but both wires have perfect resistence!what can I do car drives fine...
04-27-2008, 11:09 AM
#3
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2006
Location: Cali
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
nothings melted,the wires have perfect resistence even while being twisted around,plugs are snug,connections are tight,metal heat shield are in place....What can it be?
06-06-2008, 04:04 PM
#5
Registered User
Join Date: Jun 2008
Location: Windsor
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
I have a 01 SS with MSD wires..Ever since I changed my Spark PLugs my V1 radar detector would go crazy during high rpm and WOT...So someone suggested the wiring might be bad and turns out I had two Loose spark plugs..But the wires are still arching I replaced two wires drivers side and now the other two are arching one at the coil and the other by the spark plug but both wires have perfect resistence!what can I do car drives fine...
Also, what type of spark plugs are you using? 