PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

Help car misfiring

Thread Tools
 
Search this Thread
 
Old 05-08-2008, 09:55 AM
  #1  
11 Second Club
Thread Starter
iTrader: (13)
 
1996z28's Avatar
 
Join Date: May 2005
Location: san angelo tx
Posts: 153
Likes: 0
Received 0 Likes on 0 Posts

Default Help car misfiring

The car was down for a few days. I was putting a fuel pump in it and finishing wiring up the nitrous. When I went to drive the car it was misfiring real bad. I checked the codes it showed primary secondary coil malfunction P0358 P0351. I switched out the coil packs and it is still throwing the code. I am at a loss. Can someone help me out--I need the car!

btw this is a 99 ta
Old 05-09-2008, 12:53 AM
  #2  
Staging Lane
iTrader: (4)
 
camsom's Avatar
 
Join Date: Mar 2006
Posts: 96
Likes: 0
Received 0 Likes on 0 Posts

Default

ttt....
Old 05-09-2008, 02:18 PM
  #3  
11 Second Club
Thread Starter
iTrader: (13)
 
1996z28's Avatar
 
Join Date: May 2005
Location: san angelo tx
Posts: 153
Likes: 0
Received 0 Likes on 0 Posts

Default

I've changed the coil pack 3 times now. I changed plugs and wires. I've checked the grounds on the back of the heads. I've checked all the pins in the ECU--everything looks fine but still throwing codes. I am at a loss now. Please if anyone else has any information please let me know.
Old 05-10-2008, 01:12 PM
  #4  
TECH Veteran
iTrader: (246)
 
robsquikz28's Avatar
 
Join Date: Mar 2008
Location: Chicago/Crown point
Posts: 4,987
Received 0 Likes on 0 Posts

Default

what did you tear apart on the motor to install ur nitrous
Old 05-10-2008, 08:04 PM
  #5  
11 Second Club
Thread Starter
iTrader: (13)
 
1996z28's Avatar
 
Join Date: May 2005
Location: san angelo tx
Posts: 153
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by robsquikz28
what did you tear apart on the motor to install ur nitrous
Nothing it is a dry kit, I just drilled holes in the lid.




All times are GMT -5. The time now is 02:00 PM.