Buying LS1edit next week. Where to start?
Buying LS1edit next week. Where to start? I am buying edit this weekend and wondering what I should start with. 01 M6, mods in sig. Some ideas were:
Fans (On, off)
Changing the fuel tables from cell 0-21 (Using MAFT right now)
Adding timing (most I ever see is 24* @ 6k)
ASR??
Torque Management
Cat over temp (Does this work if I have cats but use O2 simms? See link) http://www.geocities.com/sqwznss/y_pipe.html
What else?
Fans (On, off)
Changing the fuel tables from cell 0-21 (Using MAFT right now)
Adding timing (most I ever see is 24* @ 6k)
ASR??
Torque Management
Cat over temp (Does this work if I have cats but use O2 simms? See link) http://www.geocities.com/sqwznss/y_pipe.html
What else?
Launching!
Joined: Aug 2002
Posts: 281
Likes: 1
From: Sherwood, AR
Re: Buying LS1edit next week. Where to start? Bump your rev limiter, Diable cags, lower the temps at which your fans come on and off, if you don't have cats, disable the overtemp protection. There are a few other things also.
Re: Buying LS1edit next week. Where to start? No need to raise the rev limiter until you get the TR224 and new springs installed. 6200 rpm is about 1000 rpm above what the stock cam peaks at anyway.
On The Tree
Joined: Oct 2002
Posts: 127
Likes: 0
From: Louisville, KY
Re: Buying LS1edit next week. Where to start? 
